<![CDATA[Milzy Motorsports: New Products - Exhaust]]> https://www.milzymotorsports.com Wed, 08 Apr 2026 19:41:45 +0000 <![CDATA[MMS Stainless Downpipe for Pre-Gen W-body 3100 vehicles]]> https://www.milzymotorsports.com/mms-stainless-downpipe-for-pre-gen-w-body-3100-vehicles/ Tue, 22 Aug 2023 18:49:20 +0000 https://www.milzymotorsports.com/mms-stainless-downpipe-for-pre-gen-w-body-3100-vehicles/ Our new 304 Stainless Steel downpipes will eliminate the most restrictive point in your "Pre-gen" W-body's exhaust system. The factory downpipe is even more restrictive than it looks since the bend is double-walled, which results in an actual diameter around 2..

Price: $349.99

]]> Our new 304 Stainless Steel downpipes will eliminate the most restrictive point in your "Pre-gen" W-body's exhaust system. The factory downpipe is even more restrictive than it looks since the bend is double-walled, which results in an actual diameter around 2..

Price: $349.99

]]> Our new 304 Stainless Steel downpipes will eliminate the most restrictive point in your "Pre-gen" W-body's exhaust system. The factory downpipe is even more restrictive than it looks since the bend is double-walled, which results in an actual diameter around 2..]]> <![CDATA[MMS 3800 Tubular Exhaust Manifold for Supercharged and Nonsupercharged engines]]> https://www.milzymotorsports.com/mms-3800-tubular-exhaust-manifold-for-supercharged-and-nonsupercharged-engines/ Wed, 24 Dec 2014 18:46:44 +0000 https://www.milzymotorsports.com/mms-3800-tubular-exhaust-manifold-for-supercharged-and-nonsupercharged-engines/ This part is made to be a direct replacement for the factory front exhaust manifold on any 3800 series II or III engine, supercharged or non-supercharged in a front wheel drive vehicle.  Unlike the rear exhaust manifold, which is tubular from the factory, the stock front manifold is cast i..

Price: $249.99

]]> This part is made to be a direct replacement for the factory front exhaust manifold on any 3800 series II or III engine, supercharged or non-supercharged in a front wheel drive vehicle.  Unlike the rear exhaust manifold, which is tubular from the factory, the stock front manifold is cast i..

Price: $249.99

]]> This part is made to be a direct replacement for the factory front exhaust manifold on any 3800 series II or III engine, supercharged or non-supercharged in a front wheel drive vehicle.  Unlike the rear exhaust manifold, which is tubular from the factory, the stock front manifold is cast i..]]> <![CDATA[PreGen W-body (95-99 Monte Carlo/88-96 Grand Prix/Cutlass/etc) 3100 headers]]> https://www.milzymotorsports.com/pregen-w-body-95-99-monte-carlo-88-96-grand-prix-cutlass-etc-3100-headers/ Wed, 24 Sep 2014 14:09:36 +0000 https://www.milzymotorsports.com/pregen-w-body-95-99-monte-carlo-88-96-grand-prix-cutlass-etc-3100-headers/ PreGen W-body (95-99 Monte Carlo/88-96 Grand Prix/Cutlass/etc) 3100 headers

We've made a handful of one-off headers for these cars over the years, but we've decided to make a production run of these headers, so we are now taking orders!

These headers feature precision laser cut flange..

Price: $949.99

]]> PreGen W-body (95-99 Monte Carlo/88-96 Grand Prix/Cutlass/etc) 3100 headers

We've made a handful of one-off headers for these cars over the years, but we've decided to make a production run of these headers, so we are now taking orders!

These headers feature precision laser cut flange..

Price: $949.99

]]> We've made a handful of one-off headers for these cars over the years, but we've decided to make a production run of these headers, so we are now taking orders!

These headers feature precision laser cut flange..]]> <![CDATA[MMS Economy Stainless Downpipe for 1998-1999 Monte Carlo 3800]]> https://www.milzymotorsports.com/mms-economy-stainless-downpipe-for-1998-1999-monte-carlo-3800/ Wed, 13 Feb 2013 20:43:13 +0000 https://www.milzymotorsports.com/mms-economy-stainless-downpipe-for-1998-1999-monte-carlo-3800/ MMS Economy Stainless Downpipe for 1998-1999 Monte Carlo 3800

We've created a new line of downpipes to give people on a budget a cheaper option than our $275 downpipes.  Like our other downpipes, our new economy downpipe will eliminate the most restrictive point in your Monte Carlo's exhaust system. The factory down..

Price: $274.99

]]> MMS Economy Stainless Downpipe for 1998-1999 Monte Carlo 3800

We've created a new line of downpipes to give people on a budget a cheaper option than our $275 downpipes.  Like our other downpipes, our new economy downpipe will eliminate the most restrictive point in your Monte Carlo's exhaust system. The factory down..

Price: $274.99

]]> We've created a new line of downpipes to give people on a budget a cheaper option than our $275 downpipes.  Like our other downpipes, our new economy downpipe will eliminate the most restrictive point in your Monte Carlo's exhaust system. The factory down..]]> <![CDATA[Stainless Steel Header Bolts for 3x00 engines.]]> https://www.milzymotorsports.com/stainless-steel-header-bolts-for-3x00-engines/ Wed, 30 Jan 2013 18:40:05 +0000 https://www.milzymotorsports.com/stainless-steel-header-bolts-for-3x00-engines/ Stainless Steel Header Bolts for 3x00 engines.

These stainless allen-head bolts are a good addition to any set of headers, or ported exhaust manifolds, or if you just want to dress up your engine bay a little.  These bolts have a 6mm allen-head and retain the factory torque specs.  Kit comes with all 12 bolts for bolting the exhau..

Price: $19.99

]]> Stainless Steel Header Bolts for 3x00 engines.

These stainless allen-head bolts are a good addition to any set of headers, or ported exhaust manifolds, or if you just want to dress up your engine bay a little.  These bolts have a 6mm allen-head and retain the factory torque specs.  Kit comes with all 12 bolts for bolting the exhau..

Price: $19.99

]]> These stainless allen-head bolts are a good addition to any set of headers, or ported exhaust manifolds, or if you just want to dress up your engine bay a little.  These bolts have a 6mm allen-head and retain the factory torque specs.  Kit comes with all 12 bolts for bolting the exhau..]]> <![CDATA[3800 O-ring'd EGR Delete]]> https://www.milzymotorsports.com/3800-o-ringd-egr-delete/ Sun, 16 Dec 2012 21:15:07 +0000 https://www.milzymotorsports.com/3800-o-ringd-egr-delete/ 3800 O-ring'd EGR Delete

EGR stands for Exhaust Gas Recirculation. The EGR valve allows exhaust gas back into the intake manifold to be combusted further. These exhaust gases bring unnecessary heat and unclean air into the intake charge, which has a negative effect on power output.Price: $29.99

]]> 3800 O-ring'd EGR Delete

EGR stands for Exhaust Gas Recirculation. The EGR valve allows exhaust gas back into the intake manifold to be combusted further. These exhaust gases bring unnecessary heat and unclean air into the intake charge, which has a negative effect on power output.Price: $29.99

]]> EGR stands for Exhaust Gas Recirculation. The EGR valve allows exhaust gas back into the intake manifold to be combusted further. These exhaust gases bring unnecessary heat and unclean air into the intake charge, which has a negative effect on power output. <![CDATA[1994-1995 3x00 EGR Delete Kit]]> https://www.milzymotorsports.com/1994-1995-3x00-egr-delete-kit/ Fri, 14 Dec 2012 17:26:39 +0000 https://www.milzymotorsports.com/1994-1995-3x00-egr-delete-kit/ 1994-1995 3x00 EGR Delete Kit

EGR stands for Exhaust Gas Recirculation. The EGR valve allows exhaust gas back into the intake manifold to be combusted further. These exhaust gases bring unnecessary heat and unclean air into the intake charge, which has a negative effect on power output.Price: $29.99

]]> 1994-1995 3x00 EGR Delete Kit

EGR stands for Exhaust Gas Recirculation. The EGR valve allows exhaust gas back into the intake manifold to be combusted further. These exhaust gases bring unnecessary heat and unclean air into the intake charge, which has a negative effect on power output.Price: $29.99

]]> EGR stands for Exhaust Gas Recirculation. The EGR valve allows exhaust gas back into the intake manifold to be combusted further. These exhaust gases bring unnecessary heat and unclean air into the intake charge, which has a negative effect on power output. <![CDATA[3100/3400 EGR adapter for '90-95 EGR to 2000+ upper intake]]> https://www.milzymotorsports.com/3100-3400-egr-adapter-for-90-95-egr-to-2000-upper-intake/ Thu, 13 Dec 2012 22:00:25 +0000 https://www.milzymotorsports.com/3100-3400-egr-adapter-for-90-95-egr-to-2000-upper-intake/ 3100/3400 EGR adapter for '90-95 EGR to 2000+ upper intake

Using this adapter, you can bolt your early style EGR to a 2000-2005 3400 upper intake manifold or LX9 3500 upper intake manifold. This is necessary when doing a 3400 swap in a '95 or earlier 3100 car, where you'll be using the factory computer and wiring harn..

Price: $54.99

]]> 3100/3400 EGR adapter for '90-95 EGR to 2000+ upper intake

Using this adapter, you can bolt your early style EGR to a 2000-2005 3400 upper intake manifold or LX9 3500 upper intake manifold. This is necessary when doing a 3400 swap in a '95 or earlier 3100 car, where you'll be using the factory computer and wiring harn..

Price: $54.99

]]> Using this adapter, you can bolt your early style EGR to a 2000-2005 3400 upper intake manifold or LX9 3500 upper intake manifold. This is necessary when doing a 3400 swap in a '95 or earlier 3100 car, where you'll be using the factory computer and wiring harn..]]> <![CDATA[MMS Ceramic-Coated 96-97 3.4 DOHC Headers]]> https://www.milzymotorsports.com/mms-ceramic-coated-96-97-3-4-dohc-headers/ Tue, 11 Dec 2012 22:41:02 +0000 https://www.milzymotorsports.com/mms-ceramic-coated-96-97-3-4-dohc-headers/ MMS Ceramic-Coated 96-97 3.4 DOHC Headers

Bring out the true potential of your 96-97 3.4 DOHC with these custom mandrel-bent headers. The headers feature 1 3/4" primaries tapered to match the factory oval exhaust ports, v-band clamps (a.k.a. aircraft exhaust clamps), 3-1 collectors, and laser-cut flan..

Price: $1,199.99

]]> MMS Ceramic-Coated 96-97 3.4 DOHC Headers

Bring out the true potential of your 96-97 3.4 DOHC with these custom mandrel-bent headers. The headers feature 1 3/4" primaries tapered to match the factory oval exhaust ports, v-band clamps (a.k.a. aircraft exhaust clamps), 3-1 collectors, and laser-cut flan..

Price: $1,199.99

]]> Bring out the true potential of your 96-97 3.4 DOHC with these custom mandrel-bent headers. The headers feature 1 3/4" primaries tapered to match the factory oval exhaust ports, v-band clamps (a.k.a. aircraft exhaust clamps), 3-1 collectors, and laser-cut flan..]]> <![CDATA[1996-1999 3x00 EGR Delete Kit]]> https://www.milzymotorsports.com/1996-1999-3x00-egr-delete-kit/ Tue, 11 Dec 2012 22:37:23 +0000 https://www.milzymotorsports.com/1996-1999-3x00-egr-delete-kit/ 1996-1999 3x00 EGR Delete Kit

 

EGR stands for Exhaust Gas Recirculation. The EGR valve allows exhaust gas back into the intake manifold to be combusted further. These exhaust gases bring unnecessary heat and unclean air into the intake charge, which has a negative effect on power output.
This EGR de..

Price: $29.99

]]> 1996-1999 3x00 EGR Delete Kit

 

EGR stands for Exhaust Gas Recirculation. The EGR valve allows exhaust gas back into the intake manifold to be combusted further. These exhaust gases bring unnecessary heat and unclean air into the intake charge, which has a negative effect on power output.
This EGR de..

Price: $29.99

]]>  

EGR stands for Exhaust Gas Recirculation. The EGR valve allows exhaust gas back into the intake manifold to be combusted further. These exhaust gases bring unnecessary heat and unclean air into the intake charge, which has a negative effect on power output.
This EGR de..]]> $29.99]]>