<![CDATA[Milzy Motorsports: New Products - Intake and Fuel Delivery]]> https://www.milzymotorsports.com Sun, 24 May 2026 23:00:42 +0000 <![CDATA[3100/3400 Fuel Rail Brackets for 2" EV1 injectors]]> https://www.milzymotorsports.com/3100-3400-fuel-rail-brackets-for-2-ev1-injectors/ Fri, 29 Mar 2013 17:40:26 +0000 https://www.milzymotorsports.com/3100-3400-fuel-rail-brackets-for-2-ev1-injectors/ 3100/3400 Fuel Rail Brackets for 2" EV1 injectors

These are the same fuel rail brackets that come in our injector kits for the 3100 and 3400 engines for use with 2" EV1 style injectors.  Since the injectors are shorter than the stock 22.5lb Multec2's, these brackets are dsigned to lower the fuel rails to the proper height for th..

Price: $49.99

]]> 3100/3400 Fuel Rail Brackets for 2" EV1 injectors

These are the same fuel rail brackets that come in our injector kits for the 3100 and 3400 engines for use with 2" EV1 style injectors.  Since the injectors are shorter than the stock 22.5lb Multec2's, these brackets are dsigned to lower the fuel rails to the proper height for th..

Price: $49.99

]]> These are the same fuel rail brackets that come in our injector kits for the 3100 and 3400 engines for use with 2" EV1 style injectors.  Since the injectors are shorter than the stock 22.5lb Multec2's, these brackets are dsigned to lower the fuel rails to the proper height for th..]]> <![CDATA[Threaded IAT and Aluminum Weld Bung Kit for late model GM vehicles.]]> https://www.milzymotorsports.com/threaded-iat-and-aluminum-weld-bung-kit-for-late-model-gm-vehicles/ Mon, 14 Jan 2013 23:28:33 +0000 https://www.milzymotorsports.com/threaded-iat-and-aluminum-weld-bung-kit-for-late-model-gm-vehicles/ Threaded IAT and Aluminum Weld Bung Kit for late model GM vehicles.

A Threaded IAT means you can retain the function of your stock Intake Air Temperature sensor without having to deal with all the problems caused by loose-fitting grommets causing intake leaks.  Simply weld this aluminum bung into your cold air intake or turbo charge tubing, and then i..

Price: $34.99

]]> Threaded IAT and Aluminum Weld Bung Kit for late model GM vehicles.

A Threaded IAT means you can retain the function of your stock Intake Air Temperature sensor without having to deal with all the problems caused by loose-fitting grommets causing intake leaks.  Simply weld this aluminum bung into your cold air intake or turbo charge tubing, and then i..

Price: $34.99

]]> A Threaded IAT means you can retain the function of your stock Intake Air Temperature sensor without having to deal with all the problems caused by loose-fitting grommets causing intake leaks.  Simply weld this aluminum bung into your cold air intake or turbo charge tubing, and then i..]]> <![CDATA[T-Bolt Clamps]]> https://www.milzymotorsports.com/t-bolt-clamps/ Mon, 14 Jan 2013 23:05:46 +0000 https://www.milzymotorsports.com/t-bolt-clamps/ T-Bolt Clamps

These high quality heavy duty T-bolt clamps are made of Stainless Steel, and are the perfect addition to any custom turbo kit or cold air intake.  These are the same clamps we use in our turbo kits.

Price: $4.99

]]> T-Bolt Clamps

These high quality heavy duty T-bolt clamps are made of Stainless Steel, and are the perfect addition to any custom turbo kit or cold air intake.  These are the same clamps we use in our turbo kits.

Price: $4.99

]]> These high quality heavy duty T-bolt clamps are made of Stainless Steel, and are the perfect addition to any custom turbo kit or cold air intake.  These are the same clamps we use in our turbo kits.

]]> <![CDATA[Aluminum Mandrel 45-degree Bends]]> https://www.milzymotorsports.com/copy-of-aluminum-mandrel-45-degree-bends/ Mon, 14 Jan 2013 22:42:56 +0000 https://www.milzymotorsports.com/copy-of-aluminum-mandrel-45-degree-bends/ Aluminum Mandrel 45-degree Bends

Choose desired diameter.  Dimensions listed below for each bend.  Diameter is measured on the OD of the pipe, bend radius is measured from from center of bend to centerline of pipe.  Legs are measured from tangent of bend to the end.  Each end of aluminum bends is bead-rolle..

Price: $15.99

]]> Aluminum Mandrel 45-degree Bends

Choose desired diameter.  Dimensions listed below for each bend.  Diameter is measured on the OD of the pipe, bend radius is measured from from center of bend to centerline of pipe.  Legs are measured from tangent of bend to the end.  Each end of aluminum bends is bead-rolle..

Price: $15.99

]]> Choose desired diameter.  Dimensions listed below for each bend.  Diameter is measured on the OD of the pipe, bend radius is measured from from center of bend to centerline of pipe.  Legs are measured from tangent of bend to the end.  Each end of aluminum bends is bead-rolle..]]> <![CDATA[Aluminum Mandrel 90-degree Bends]]> https://www.milzymotorsports.com/aluminum-mandrel-u-bends-1/ Mon, 14 Jan 2013 22:29:45 +0000 https://www.milzymotorsports.com/aluminum-mandrel-u-bends-1/ Aluminum Mandrel 90-degree Bends

Choose desired diameter.  Dimensions listed below for each bend.  Diameter is measured on the OD of the pipe, bend radius is measured from from center of bend to centerline of pipe.  Legs are measured from tangent of bend to the end.  Each end of aluminum bends is bead-rolle..

Price: $15.99

]]> Aluminum Mandrel 90-degree Bends

Choose desired diameter.  Dimensions listed below for each bend.  Diameter is measured on the OD of the pipe, bend radius is measured from from center of bend to centerline of pipe.  Legs are measured from tangent of bend to the end.  Each end of aluminum bends is bead-rolle..

Price: $15.99

]]> Choose desired diameter.  Dimensions listed below for each bend.  Diameter is measured on the OD of the pipe, bend radius is measured from from center of bend to centerline of pipe.  Legs are measured from tangent of bend to the end.  Each end of aluminum bends is bead-rolle..]]> <![CDATA[Aluminum Mandrel U-bends]]> https://www.milzymotorsports.com/aluminum-mandrel-u-bends/ Mon, 14 Jan 2013 21:08:19 +0000 https://www.milzymotorsports.com/aluminum-mandrel-u-bends/ Aluminum Mandrel U-bends

Choose desired diameter.  Dimensions listed below for each bend.  Diameter is measured on the OD of the pipe, bend radius is measured from from center of bend to centerline of pipe.  Legs are measured from tangent of bend to the end.  Each end of aluminum bends is bead-rolle..

Price: $17.99

]]> Aluminum Mandrel U-bends

Choose desired diameter.  Dimensions listed below for each bend.  Diameter is measured on the OD of the pipe, bend radius is measured from from center of bend to centerline of pipe.  Legs are measured from tangent of bend to the end.  Each end of aluminum bends is bead-rolle..

Price: $17.99

]]> Choose desired diameter.  Dimensions listed below for each bend.  Diameter is measured on the OD of the pipe, bend radius is measured from from center of bend to centerline of pipe.  Legs are measured from tangent of bend to the end.  Each end of aluminum bends is bead-rolle..]]> <![CDATA[Custom Order]]> https://www.milzymotorsports.com/custom-order/ Wed, 05 Dec 2012 19:01:44 +0000 https://www.milzymotorsports.com/custom-order/ Custom Order

Custom Order, now with different pricing options for easier shopping.  Simply make the total add up to the desired amount, and let us know what you want to order.  Once we approve the order, we will get to work on filling it.  If we don't approve the purchase, we will refund it i..

Price: $1.00

]]> Custom Order

Custom Order, now with different pricing options for easier shopping.  Simply make the total add up to the desired amount, and let us know what you want to order.  Once we approve the order, we will get to work on filling it.  If we don't approve the purchase, we will refund it i..

Price: $1.00

]]> Custom Order, now with different pricing options for easier shopping.  Simply make the total add up to the desired amount, and let us know what you want to order.  Once we approve the order, we will get to work on filling it.  If we don't approve the purchase, we will refund it i..]]>