Milzy Motorsports: New Products - Intake and Fuel Delivery

Northstar 75mm mechanical throttle body kit for Gen V Superchargers

Tue, 20 Dec 2016 16:58:27 +0000

This kit comes with everything necessary to convert your Gen V supercharger to a mechanical 75mm throttle body. This is an aftermarket upgrade for an L67 engine because the L67 comes with a Gen III Eaton M90, not a Gen V. This part is used to convert the drive by wire throttle bod..

Price: $319.99

3500 Upper Intake Conversion Kit for 3100/3400 engines

Fri, 22 Feb 2013 21:21:15 +0000

This kits allows you to adapt a 3500 upper intake manifold to fit your 3100 or 3400 engine. It is necessary for your engine to have the large port lower intake manifold, so if you have a 94-99 3100 engine, you will need to upgrade to the 3400 style lower..

Price: $104.99

Ported and Polished 3800 Supercharged (L67 and L32) Lower Intake

Sun, 16 Dec 2012 22:20:58 +0000

We start with a stock intake manifold, and port-match both the inlet and outlet ports to their respective gaskets. This increases the flow of the port while reducing friction from ..

Price: $199.99

Northstar TB adapter for Gen V M90

Sun, 16 Dec 2012 22:17:25 +0000

This adapter plate allows you to bolt a Northstar 75mm throttle body to your Gen V M90. It also does so without the use of any RTV because both the throttle body and the adapter plate are outfitted with o-rings for a very easy and clean install. Comes with nec..

Price: $69.99

Dorman L36 Upper Intake Manifold

Sun, 16 Dec 2012 22:01:16 +0000

Brand New High-Quality Dorman OE-Solutions Replacement Upper Intake Manifold
This redesigned intake features: Increased EGR wall thickness to eliminate corrosion Reinforced structure to withstand an engine backfire New plastic & silicone gasket alread..

Price: $124.99

Ported and Polished 3800 Non-supercharged (L36 and L26) Lower Intake

Sun, 16 Dec 2012 21:54:05 +0000

We start with a stock intake manifold, and port-match both the inlet and outlet ports to their respective gaskets. This increases the flow of the port while reducing friction from the stock manifold's rough casting. The result is more horspower and t..

Price: $199.99

3800 O-ring'd EGR Delete

Sun, 16 Dec 2012 21:15:07 +0000

EGR stands for Exhaust Gas Recirculation. The EGR valve allows exhaust gas back into the intake manifold to be combusted further. These exhaust gases bring unnecessary heat and unclean air into the intake charge, which has a negative effect on power output.Price: $29.99

3500 Top Swap (w/ ported intakes and gaskets!)

Sun, 16 Dec 2012 19:15:35 +0000

Upgrade yor 3100 or 3400 engine with this 3500 "top swap" conversion. This kit comes with everything you need for the job including the 3500 cylinder heads (with options for our Stage 1 and Stage 2 portwork and valvetrain), ported 3500 lower intake, ported 340..

Price: $849.99

Ported and Polished 3100/3400/3500 Upper Intake Manifold

Sun, 16 Dec 2012 19:06:37 +0000

If you want to use a larger throttle body than our 59mm unit, you'll need to port the upper intake to see any more gain, because the stock port size is 58mm. For those customers who only want an upper intake manifold, we offer this part by itself for a v..

Price: $145.00

Ported and Polished 3100/3400/3500 Upper and Lower Intakes (w/ gaskets!)

Fri, 14 Dec 2012 19:50:03 +0000

Milzy Motorsports Ported and Polished Intakes are a great complement to our heads and cams or even a stock car. These intakes will allow your engine to breath better and allow for less restrictive airflow to see greater gains from our aftermarket heads and cam..

Price: $449.99