Loading... Please wait...


Our Newsletter

1999-2005 Grand Am/N-body 3400 headers

  • Image 1
  • Image 2
Your Price:
$799.99 (You save $150.00)
35.00 LBS
Calculated at checkout

Product Description

The wait is over ... the best-performing and highest-quality Grand Am headers have arrived, and at a reasonable price! These headers feature precision laser cut flanges, 1 5/8" runners, v-band clamp connections (instead of slip fit or donut gaskets), 2 1/2" crossover, extra O2 bung for wideband, professional TIG welds, and thermal barrier silver ceramic coating. We've also gone through great lengths to make sure the headers fit your vehicle perfectly, providing sufficient clearance to the transmission, radiator and heater hoses, fuel lines, brake components, fuse box, etc. We've test-fitted the headers on the stock transmission as well as a 4t65e automatic and the F40 6 speed, which are the two most commonly swapped transmissions in N-bodies, all of which fit without issue and with plenty of clearance for crutial components. We've also designed them to be easier to install than other brands of headers due to our primary design and use of v-band clamps. These headers would be the perfect complement to any NA or supercharged setup, offering a significant power gain and improved sound. Look for gains of around 15-20whp on stock-mild applications, and even higher on highly modified cars. Dyno results coming soon.

Please note that the above pictures are of the prototype set which are currently at ceramic coating. We will post updated pictures when we receive them.

The available downpipe is made of 2 1/2" stainless steel, complete with a v-band flange to attach to the headers, and a 3/8" stainless flange to bolt to the stock cat-back flange. You also have the option to add a highflow catalytic converter. Catted downpipes also include a rear O2 bung. If you opt to not get the downpipe, you will still receive a mild steel v-band flange and clamp to make your own if you choose to.

Headers will also bolt up to a 3500 LX9 engine if you've done a swap.

Please not these headers do not have provisions for the EGR valve, so you will need to block off the EGR port on the intake manifold, and remove DTC's from the PCM.

These headers are considered a custom order, as they are built to order rather than being a stocked item.  Typical lead-time on these headers depends is 6-10 weeks, but depends highly on current workload.  Contact mikem@milzymotorsports.com to inquire on current lead-time.

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the 1999-2005 Grand Am/N-body 3400 headers to your wish list.

You Recently Viewed...